The information on this page applies to Airport on Mac OS X.

Configuration

You should follow these instructions if your wireless router has already been setup with a wireless network and your Airport card is enabled.
For information on setting up a wireless network please contact the manufacture of the router.

1. Make sure your Apple Airport Card is enabled by clicking on the Airport icon in the upper right hand corner.Airport should be displayed as ON.

.

2. Listed in the drop down box should be your wirless network provided by your router. To join the wireless network, click on the name of
of the network and you will be presented with the following Network window below.

3. In network window, set the wireless security to WEP 40/128-bit hex. Enter the network name if it is not already there and enter the wep
network password that you specified while setting up the network. Click ok after all details have been entered.

4. Once you have been connected, open Safari and test that you have access to the internet.

If you experience issue's please contact either Apple or the manufacturer of your wireless router.